Toggle navigation

How it works

All you need is the mo2drive mobile app or web app!
Your smartphone is the key to the mo2drive fleet

1
Download mo2drive App
2
Register
3
Start keyless
4
Go!
App Store Logo
Google Play Logo

mo2drive App for iOS and Android or without download directly via the web app

Short instructions

For petrol-powered scooters
(Vespa, Yamaha und Sym)

  1. Start the rental in the mo2drive app or in the web app

  2. Open the seat with the green illuminated push button (left under the handlebars)

  3. In the seat are helmet, disposable hoods and if necessary (if the scooter is equipped with a Topcase) the key for the Topcase. There you will find a second helmet.

  4. Put on the helmet and adjust the buckle to the right length.

  5. Make sure that the side stand is folded down (if present).

  6. Keep both brake levers pulled and simultaneously press the engine start button with your right thumb (2-3 seconds) until the scooter starts.

  7. To stop the engine, press the green button again. This also opens the seat at the same time.

  8. At the end of your ride put the scooter back on the main stand and close the seat (press down firmly).

  9. Then you can end the rental in the mo2drive app or Web app (green light on the push button goes out).

For electric scooters
(NIU)

  1. Start the rental in the mo2drive app or web app

  2. Open the seat with the green illuminated push button (left under the handlebars)

  3. In the seat are helmet, disposable hoods and the key for the topcase. There you will find a second helmet.

  4. Put on the helmet and adjust the buckle to the right length.

  5. Make sure the side stand is folded.

  6. Keep both brake levers pulled and simultaneously press the green engine start button with your right thumb (2-3 seconds) until the scooter starts.

  7. This switches the scooter from parking mode to driving mode – the P symbol in the vehicle display (top centre) disappears. You’re good to go.
    Attention: The start is completely soundless. There’s no jumping.

  8. At the end of your ride put the scooter back on the stand, put the helmet back into the helmet compartment / topcase and close the seat (press down firmly). The engine stops automatically.

  9. Then you can end the rental in the mo2drive app or Web app (green light on the push button goes out).

Do you have any more questions?

Have a look at our FAQ page, there you will find the explanations:
Step-by-step instructions for 50ccm and 125ccm scooters
Step-by-step instructions for electric scooter